Heavy duty single phase, capacitor start,  Hi-Torque Motors design specifically for severe  applications. 1725 rpm, TEFC 56 Frame,  input voltage 110/220 VAC, cw/ccw rotation.  Built in thermal overload w/ manual reset.  

Specifically selected for the KMG grinders for use in the home shop or industry.

All these packages run on standard 110V or 220V single phase input as noted!

Packages include:

• cable glands

• electrical connectors

• 4 conductor cord from controller to motor

•  VFD mounting bracket with hardware

• Power on/off switch

Switch/wiring kit:  SK  $38

1.5 hp: motor and drive  (cat no. VS-VFD-1.5) :  $896

(110 or 220V)

Packages include cable glands, electrical connectors, 4 conductor cord from controller to motor and a VFD mounting bracket with hardware.

(220V only)

Packages include cable glands, electrical connectors, 4 conductor cord from controller to motor and a VFD mounting bracket with hardware.

(220V only)

Packages are pre-wired and supplied with cable glands, electrical connectors, 4 conductor cord from controller to motor and a VFD mounting bracket with hardware.

Click here for Suggested set-up notes

Click here for Suggested set-up notes

For use with Constant speed motors

For Variable speed motors

 3 Speed KMG set-up:

Using a set of 3-groove step pulleys, the KMG will yield 3 belts speeds of:

3500 ft/min, 1750 ft/min  800  ft/min.

4", 3", 2" diameter

Cast iron, machined and balanced for smooth vibration free performance.

5/8" bore     MAS42X5/8 (for the 110089 motor drive shaft)
3/4" bore     MAS42X3/4 (for the KMG drive shaft)
7/8" bore     MAS42X7/8 (for the 110090 motor drive shaft)

$42 ea.

Recommended pulleys to be used with the Variable Speed KMG grinder:

Grinder pulley: MA25X3/4 (2-1/2" dia X 3/4" bore) $16

 Motor pulleys: 

1-1/2 and 2 hp  MA50X5/8 (5" dia x 5/8 bore)  $22

3 hp                   MA50X7/8 (5" dia x 7/8 bore)  $22

  A23  $9.5ea.

  A23  $9.5ea.

Base plate for motor and Grinder

KMG-SUBP 

Price: $115

(click image for details)